wheels are handbuilt to strict quality standards.
Build Specifications: The
strict build tolerances of our wheels are among the best in the entire
industry. Each and every wheelset is built with a maximum lateral tolerance of
0.3 mm, radial tolerance of 0.4 mm and dishing tolerance of 0.5 mm. Spoke
tension is tested and adjusted to remain between 900 ~ 1100 N for the front
wheel and 1100 ~1300 N for the rear wheel’s drive side.
Stress Relief: In
order to keep the spoke from twisting during wheel building, we carry out spoke
stress release to make sure both of the strength of the hub spoke holes and
carbon rim nipple hole corresponds with the strength in need.
Final Quality Check: Each wheel undergoes one final check
Carbon Rim Tech
Carbon Braking Surface
1. High TG resin ceramic fiber composite reinforced braking surface
maximizes high performance braking.
high use and high friction the rim keeps lateral specification while
there is a significant reduction in the thermal expansion on the braking
surface as compared to ordinary carbon fiber rims. It also offers a
longevity to the rim that products of the past could not.
REINFORCED CERAMIC FIBER COMPOSITE BRAKING SURFACE TEST REPORT (click here) HEAT BUILD UP GRAPH -TIRE PRESSURE vs BRAKING (click here
2. Engineered profile design
a stiffer rim characteristic that increases the ride performance for
climbing, high speed acceleration and reaction as well as premium track
3. Special design of
the brake pad compound which has special heat dissipation properties to
eliminate overheating. State of the art ACL carbon fiber usage. Advanced
Carbon Layers offer optimal balance of strength-to-weight ratio.Hub Technology
Williams new hubs
incorporate revolutionary new designs along with a cassette body that
contains 6 Pawls, 60 Ratchets.
The 6 pawls have been
engineered to divide the engagement into 2 groups that are 3 pawls or
6 pawls in the engagement process. Each group of pawls engages into
ratchet ring at the same time whenever drive torque is applied, this
translates into faster and more efficient power transfer. In addition
we have added a high-strength, hardness and precision fine extrusion
process to the pawls and overall design.
6 pawls engage
with 60 ratchets faster and smoother than traditional hubs equaling
better power transfer
Each pawl has
triple tips making more contact point than other hub in the market:
point engagement with 6 pawls
3 degrees of engagement
- Interchangeable Cassette Body
- Shimano/SRAM 10/11speed compatible
- Campagnolo 10/11 speed compatible
Sapim CX Ray Spokes
The CX-Ray still receives the best results in
fatigue testing of any spoke. Its unique strength and flexibility
make the CX-Ray suitable for most bicycle disciplines. The middle
section of the spoke is drawn then pressed in a special mold to form
its specific profile. CX-Ray spokes are used by top bike racers
and triathletes around the world. Special alloy treatment and
sophisticated production make this all possible.
lasting than any other spokes on the market.Extremely high fatigue
treatment and sophisticated production.
aerodynamic spoke available.
high-tensile, fatigue-resistant 18/8 stainless steel conforming to
the Sapim quality standard specifications.
middle section: 1600 N/mm
Sizes: 2,0 -
(0,9x2,2) - 2,0 mm
Elliptic aero part